850MM MELT-BLOWN PP FILTER MATERIAL MAKING LINE
Simple type Machine Line, see the following video:
Melt-blown material making machine filtering material melt-blown fabric COVID-19 mask fabric
melt-blown material machine / melt blown material for mask machine line
melt blown filter material machine/ melt blown polypropylene filter material extrusion line
melt-blow polymer materials extruder/filtering material melt-blown fabric extruder
COVID-19 mask material extrusion machine line
HS CODE: 8477.2010
Purpose: for melt blown material making, plastic extrusion machine line to make belt-blown material making.
Machine model/ name: 850MM MELT-BLOWN PP FILTER MATERIAL MAKING LINE
Support machine devices:
Whole line includes following devices:
Vertical type Mixer, Vacuum suction feeder, Hopper Dryer,
50/30 single screw extruder, Duo position Screen change system,
4 ways Hydraulic workstation, 850mm melt-blown die system,
Screen convoying device, Electro-Static electret device,
Slitting/ winding machine, Power controlling system,
Plate form, High-pressure blower,
Air heating tank & air distribution pipes,
Negative pressure blower and pipes.
Auxiliary machines are as follows:
Vacuum calcining furnace; Ultrasonic washing unit
Waste edge material collector; Gram-weight electronic scale
Breathability tester; Electrostatic tester
MELT-BLOWN PP FILTER MATERIAL fabric technical parameters:
Width: 850mm
Grammage: PP: 15–200g/m2
Fiber diameter: 2-5μm
Output capacity: PP filter material: ≈25Kgs/h
Raw material: Polypropylene slices MFR1200~1500
PP filter material gram mage deviation CV values: <6%
Production speed: 2~20m/min
Installation: total installed power: 180KW, consumption: 1000~1200 kilowatt hours/T
Workers needed: 2 person/ shift
Area required: 15M*4M*5-7M(L*W*H)
Power: 220V, 3phase 4 wires, grounding: <10Ω
Air source: >0.65MPa,>5m3/min
Water required: >0.2MPa,>0.2m3/h








